Five injection network cable machine adjustment skills

1. Choose the appropriate temperature and pressure
When adjusting the injection molding machine, it is very important to ensure the reasonable configuration of temperature and pressure. Selecting the appropriate temperature, pressure and speed according to different plastic materials can ensure product quality and production efficiency. Generally speaking, the higher the melting point of the plastic material requires higher injection molding temperature and higher pressure, and vice versa, lower temperature and pressure are required.
2. Adjust injection time and speed
The quality and mass production efficiency of injection molded products are closely related to injection time and speed. Generally speaking, injection molding time that is too long will cause defects on the product surface, while injection speed that is too fast will cause bubbles and other problems. Therefore, when adjusting the injection molding machine, it is necessary to determine the optimal injection time and speed according to different product materials and sizes.
3. Check the injection molding machine
When adjusting the injection molding machine, you need to carefully check whether all parts of the injection molding machine are functioning properly. For example, check whether the mold structure is defective, whether the cooling water pipe is smooth, whether the injection screw rotates normally, etc. Once these problems occur, they may lead to substandard product quality or low production efficiency.
4. Adjust the mold
In addition to the adjustment of the injection molding machine itself, the adjustment of the mold is also a very important step. For example, check whether the opening and closing of the mold is normal, whether the mold head is damaged, whether the pressure plate is smooth, etc. These problems may lead to inaccurate product dimensions, surface defects, etc.
5. Solve problems promptly
When adjusting the injection molding machine, you need to pay close attention to problems that arise during the production process and solve them in time. For example, whether the hydraulic system, working temperature, air system, etc. of the injection molding machine are operating normally to ensure product quality and production efficiency. In addition, it is also necessary to eliminate waste products in a timely manner and adjust the production process at any time to ensure production efficiency.