Fluke test parameters for Category 6 network cables
1000Mbps
Category 6 network cables (CAT6) are cables that meet the CAT-6 standard and have a transmission rate of 1000Mbps. Category 6 network cables are mainly used for data transmission from switches and routers to computers, and their transmission frequency is 250MHz or higher. 12
When Fluke tests Category 6 network cables, the main parameters include:
Length: Test whether the actual length of the network cable meets the standard.
Transmission delay: Measure the time delay of data transmission in the network cable.
Delay deviation: Measure the stability of data transmission time.
Branch loop resistance: Measure the resistance value of the network cable.
Insertion loss (attenuation): Measure the loss of the signal during transmission.
Return loss: Measure the loss of the signal reflected back.
Near-end crosstalk and far-end crosstalk: Measure the interference of the network cable at different frequencies.
Attenuation crosstalk ratio: Comprehensively evaluate the signal attenuation and interference.
Comprehensive equivalent far-end crosstalk: Evaluate the performance of network cables under different conditions.
In Fluke testing, the results of Category 6 twisted pair cables usually include the following parameters:
Margin: For example, the margin of NEXT (near-end crosstalk).
Test limit: For example, the test limit of TIA Cat 6 Channel.
Cable type: For example, Cat 6 UTP (unshielded twisted pair).
Operator,Software version,Test limit version,NVP (near-end crosstalk ratio),Model,S/N (serial number) of the host and remote adapter,Location and other detailed information.
Fluke testing follows the TIAEIA-568B standard and ISOIEC 11801 standard to ensure the accuracy and consistency of the test. During the test, attention should be paid to selecting the appropriate test equipment and software version to ensure the stability and security of the test environment.