cat7 cable 1200Mhz ,provide by Aixton

The latest twisted pair in the ISO/IEC 11801 Category 7/F standard, it is mainly used to adapt to the application and development of 10 Gigabit Ethernet technology. But it is no longer an unshielded twisted pair, but a shielded twisted pair, so it can provide a comprehensive attenuation-to-crosstalk ratio of at least 500MHZ and an overall bandwidth of 600MHZ. More than 2 times, the transmission rate can reach 10Gbps. In Category 7 cables, each pair of wires has a shield, and the four pairs together have a common large shield. From a physical structure point of view, the additional shielding layer makes the Category 7 cable have a larger wire diameter.
There is also an important difference in its ability to connect hardware. The parameters of the seven-type system require that all wire pairs of the connector provide at least 60DB of integrated near-end crosstalk at 600MHZ. While the Super Category 5 system only requires 43DB at 100MHZ, the value of Category 6 at 250MHZ is 46DB.